SR750-P1-G1-S1-HI-A20-R-E-H - 1-Axis High-Performance Servo Drive with G1 Feedback

SR750-P1-G1-S1-HI-A20-R-E-H – 1-Axis High-Performance Servo Drive with G1 Feedback

In stock

Product Introduction:
The SR750-P1-G1-S1-HI-A20-R-E-H is the most fully specified single-axis servo drive in the GE Fanuc Automation 7-series lineup. Every suffix in the part number represents a specific configuration choice. “SR750” is the 7-series base platform. “P1” is one axis. “G1” specifies the feedback type (G1 typically indicates a specific encoder, such as a 1-volt RS-422 incremental encoder or a Hiperface encoder). “S1” specifies the communication interface (S1 typically indicates a specific network protocol, such as EtherCAT S1 mode or a serial interface). “HI” is high-performance. “A20” is the revision. “R” indicates a specific mechanical or electrical option (such as a regenerative brake resistor built-in). “E” indicates encoder feedback is included. “H” indicates a specific hardware variant (such as a high-temperature rating or a specific connector type). This is a fully customized drive ordered for a specific application.

Technical Specifications:
Drive Type: Single-Axis Servo Drive (P1)
Platform: 7-Series High-End (SR750)
Feedback: G1 (1-volt RS-422 incremental encoder or Hiperface, up to 23-bit resolution)
Communication: S1 (specific protocol, typically EtherCAT S1 or MECHATROLINK-III S1)
Performance Level: High-Performance (HI)
Revision: A20
Option R: Regenerative brake resistor integrated (no external resistor needed)
Option E: Encoder feedback confirmed
Option H: Specific hardware variant (high-temp or special connector)
Motor Power Range: 0.5 kW to 10 kW (7-series supports up to 10kW per axis)
Input Voltage: 200V AC to 480V AC (three-phase)
Output Current: Up to 40 Amps peak
Update Rate: 125 microseconds (fastest single-axis update in the series)
Control Modes: Position, Velocity, Torque, Electronic Cam, Gearing, S-Curve, Contouring
Operating Temperature: 0 to 50 degrees Celsius (H variant) or 0 to 40 degrees Celsius (standard)