Foxboro FBM215 - I/A Series DeviceNet Slave Communication Module

Foxboro FBM215 – I/A Series DeviceNet Slave Communication Module

In stock

Product Introduction:
The Foxboro FBM215 is a DeviceNet communication module for the I/A Series Distributed Control System. DeviceNet is a lower-level industrial network commonly used in North America for connecting sensors, actuators, and simple I/O devices. The FBM215 allows the I/A Series controller to communicate with DeviceNet field devices such as photoelectric sensors, proximity switches, solenoid valves, and simple I/O modules. This module acts as a DeviceNet scanner on the DeviceNet network, polling all connected devices and exchanging process data with the I/A Series controller. It is the bridge between the high-speed I/A Series backplane and the lower-speed DeviceNet field network.

Technical Specifications:
Board Type: DeviceNet Slave Communication Module
Protocol: DeviceNet (ODVA compliant)
Baud Rate: 125 kbps, 250 kbps, 500 kbps (auto-detection)
I/O Data: Up to 512 bytes input and 512 bytes output per module
Node Address: Configurable from 0 to 99
Connection: Standard DeviceNet trunk or drop cable
Isolation: 1500V RMS galvanic isolation
Processor: 32-bit RISC with dedicated DeviceNet controller
Memory: 8MB Flash, 4MB RAM
Power: 5V DC from I/A Series backplane
Form Factor: 3U I/A Series Eurocard
Operating Temperature: 0 to 60 degrees Celsius

Functional Features:
DeviceNet Scanner: Polls all DeviceNet devices on the network and exchanges I/O data with the I/A Series controller every scan cycle.
EDS File Support: Uses EDS (Electronic Data Sheet) files for automatic device configuration and integration.
Simple Wiring: DeviceNet uses a single trunk cable with drop cables to each device, significantly reducing field wiring compared to point-to-point analog.
Diagnostic Monitoring: Monitors DeviceNet communication errors, node status, and device health.
Hot Swappable: Can be removed and replaced while the system is running.
Multiple Network Topologies: Supports trunk-drop, star, and line topologies for flexible field wiring.

Application Scenarios:
Simple I/O Networks: Connects photoelectric sensors, proximity switches, and solenoid valves in packaging machines and material handling systems.
North American Plants: Ideal for plants in North America where DeviceNet is the standard field network (as opposed to Profibus in Europe).
Retrofit Projects: Enables existing DeviceNet field devices to be integrated into a new Foxboro I/A Series DCS.
Machine Builders: Used by OEMs building machines with DeviceNet I/O that need to connect to a Foxboro DCS for supervisory control.

Show More Show Less